富士感壓紙
應變校正設備及應變代測服務
薄膜壓力量測
加速規
資料擷取系統
感測元件與系統整合
微小荷重元 / 重量傳感器
Load Cell / 荷重元應用
Strain gauge 應變規
非接觸位移計
車用系統量測
多軸力規與力板
人因工程 / 壓力感應器
生物力學實驗室規劃
扭矩感測器
   
 
 
   
● HOME > 產品介紹
 
 
產品名稱 : 拉線式位移計
 
 

 

ELECTRICAL SPEC.
Detection System    
Incremental
Output Wave   
Square Wave
Stoke (mm)   
200, 500, 1000
Standard Resolution (mm/pulse)        
1, 0.5, 0.2, 0.1, 0.04 mm/pulse
Accuracy    
±0.05% FS, ±1 count
Output Phase
AB phase or ABZ phase
Electronics 
Voltage, Open Collector, Push Pull or Line Driver
Power Supply  
DC 8~26V, DC 5V fixed
Current Consumption    
≤ 60 mA
Output Capacity    
Sync. Current: 20 mA, Residual Voltage: 0.5V or less
Max. Response  
10K Hz ~ 50K Hz
Phase Different   
A,B phase different 90°±45° (T/4±T/8), Z phase T±T/2
Wave Form Rise / Fall  
2 μs or less
Polarity   
Against Reverse Protection (Except Line Driver, Line Driver Except)

 
MECHANICAL SPEC.
Wire Specification   
Material: SUS304 with nylon coating   
Diameter: 0.6 mm; Breaking load: 16 kg
Max. Travel Speed   
1,000 mm / sec.
Vibration     
10g (10±1,500 Hz)
Shock       
20g per 11 ms
Cable
Ø4.5, 50 cm long
Weight
< 450g
Starting Torque on Spring
Max. 700 g
 
ENVIRONMENTAL SPEC.
Operating Temp. / Humidity
0°C ~ 60°C, RH 35% ~ 90% (No Condensation)
Storage Temp.
-20°C ~ 80°C
Protection
IP50: Dust Proof (only for encoder housing)
Life
Typical > 1 X 106cycles
 
  關於巨承 最新消息 產品介紹 服務據點 聯絡我們
 
Copyright© 2012 All Rights Reserved.   Design by Fourfun
02-29809925#25